Nt2X90 Rmm - Nortel DMS-100 Series Maintenance Manual

Application
Use this procedure to replace an the following card in a remote maintenance
module (RMM).
PEC
NT2X90
Common procedures
The procedure "Replacing a card" is referenced in this procedure.
Action
The following flowchart is a summary of the procedure. To replace the card,
use the instructions in the step-action procedure that follows the flowchart.
Suffix Name
AD Incoming/outgoing test trunk
DMS-100 Family OPAC Maintenance Manual XPM12 and up
8-51 Card replacement procedures 8-51 8-51
NT2X90
RMM