Nortel DMS-100 Series Maintenance Manual page 206

5-4 OPAC hardware
The pedestal is equipped with a primary power cable entrance hole for a
2.5 in. conduit. The pedestal is equipped with four knockouts for ground or
different cable entrances.
A large 7.5 in. by 24 in. opening is along the lower rear bulkhead wall inside
the pedestal. The opening allows full access to the Series 800E. Cabinet
master ground bar and mounting hole locations.
Electronics compartment that shows bay 2 and 3 Nortel-provided equipment (rear cabinet view)
Attached
power
pedestal
297-8211-550 Standard 05.01 August 1999
Bay 2
8X32 cross-connect
block for RMM scan
points
Bay 3
Batteries that can
be provisioned
Termination
compartment