Nortel DMS-100 Series Maintenance Manual page 317

12 To demount the tape drive, type
>DEMOUNT T tape_no
and press the Enter key.
where
tape_no is the number of the tape drive containing the PM load files
13 Go to step 23.
14 From office records, determine and note the number of the input/output
controller (IOC) disk. Determine and note the name of the volume containing
the PM load files.
15 To access the disk utility level of the MAP terminal, type
>DSKUT
and press the Enter key.
16 To list the IOC file names in your user directory, type
>LISTVOL volume_name ALL
and press the Enter key.
where
volume_name is the name of the volume containing the PM load files obtained
in step 14
17 To leave the disk utility, type
>QUIT
and press the Enter key.
18 Go to step 23.
19 From office records, determine and note the number of the system load module
(SLM) disk. Determine and note the name of the volume containing the PM
load files.
20 To access the disk utility level of the MAP terminal, type
>DISKUT
and press the Enter key.
DMS-100 Family OPAC Maintenance Manual XPM12 and up
Alarm clearing procedures 7-81
major
(continued)
RMM