Nortel DMS-100 Series Maintenance Manual page 455

24 Leave the disk utility by typing
>QUIT
and pressing the Enter key.
25 Reload the ESA processor by typing
>LOADPM
and pressing the Enter key.
If
load failed
load passed
26 Return the ESA processor to service by typing
>RTS
and pressing the Enter key.
If RTS
passed
failed
27 Send any faulty cards for repair according to local procedure.
28 Record the following items in office records:
date the card was replaced
serial number of the card
symptoms that prompted replacement of the card
Go to step 30.
29 Obtain further assistance in replacing this card by contacting the personnel
responsible for higher level of support.
30 You have completed this procedure.
DMS-100 Family OPAC Maintenance Manual XPM12 and up
Card replacement procedures 8-89
HIE
Do
step 29
step 26
Do
step 27
step 29
NT6X45 NT6X45
HIE
(continued) (end)