Nortel DMS-100 Series Maintenance Manual page 489

20 List the IOC file names into your user directory by typing
>LISTVOL volume_name ALL
and pressing the Enter key.
where
volume_name is the name of the volume that contains the PM load files
21 Leave the disk utility by typing
>QUIT
and pressing the Enter key.
22 Go to step 27.
23 From office records, determine and note the number of the system load module
(SLM) disk and the name of the volume that contains the PM load files.
24 Access the disk utility level of the MAP terminal by typing
>DISKUT
and pressing the Enter key.
25
List the SLM file names into your user directory by typing
>LV CM;LF file_name
and pressing the Enter key.
where
file_name is the name of the SLM disk volume containing the file to be loaded
26 Leave the disk utility by typing
>QUIT
and pressing the Enter key.
27 Reload the LCM unit by typing
>LOADPM UNIT lcm_unit CC
and pressing the Enter key.
where
lcm_unit is the LCM unit to be loaded (0 or 1)
If
load failed
load passed
DMS-100 Family OPAC Maintenance Manual XPM12 and up
Card replacement procedures 8-123
LCM
Do
step 31
step 28
NT6X53
(continued)