Nortel DMS-100 Series Maintenance Manual page 328

7-92 Alarm clearing procedures
OPAC
minor
(continued)
11
12
13
14
297-8211-550 Standard 05.01 August 1999
To identify the peripheral-side (P-side) links that have defects, type:
>TRNSL P
and press the Enter key.
Example of a MAP response:
Link 2: LCM REM1 00 0
Link 6: LCM REM1 00 0
Record information for the links that have a state other than OK.
To choose and busy the link that has defects, type:
>BSY LINK link_no
and press the Enter key.
where
link_no is the number of a P-side link that has defects identified in step 11
To test the busied link, type:
>TST LINK link_no
and press the Enter key.
where
link_no is the number of a P-side link that has defects busied in step 12
If test
passes
fails
To return the busied link to service, type:
>RTS LINK link_no
and press the Enter key.
where
link_no is the number of a P-side link that has defects busied in step12
If RTS
passes and other links are not SysB
passes but other links are SysB
fails
2; Cap MS; Status: OK
1; Cap MS; Status: SysB
Do
step 14
step 21
;MsgCond: OPN
;MsgCond: CLS
Do
step 20
step 12
step 21