Nortel DMS-100 Series Maintenance Manual page 480

8-114 Card replacement procedures
NT6X52
LCM
(continued)
8
9
10
11
12
13
297-8211-550 Standard 05.01 August 1999
Load the LCM unit by typing
LOADPM UNIT lcm_unit CC
and pressing the Enter key.
where
lcm_unit is the LCM unit to be loaded (0 or 1)
If
message loadfile not found in
directory is received
load passes
load fails
Determine the type of device on which the PM load files are located.
If load files located on
tape
IOC disk
SLM disk
Locate the tape that contains the PM load files.
Mount the tape on a magnetic tape drive.
Download the tape by typing
>MOUNT tape_no
and pressing the Enter key.
where
tape_no is the number of the tape containing the PM load files
List the contents of the tape in your user directory by typing
>LIST T tape_no
and pressing the Enter key.
where
tape_no is the number of the tape containing the PM load files
Do
step 9
step 26
step 29
Do
step10
step16
step 21