Nortel DMS-100 Series Maintenance Manual page 415

22 List the IOC file names into your user directory by typing
>LISTVOL volume_name ALL
and pressing the Enter key.
where
volume_name is the name of the volume that contains the PM load files
23 Leave the disk utility by typing
>QUIT
and pressing the Enter key.
24 Go to step 29.
25 From office records, determine and note the number of the system load module
(SLM) disk and the name of the volume that contains the PM load files.
26 Access the disk utility level of the MAP terminal by typing
>DISKUT
and pressing the Enter key.
27
List the SLM file names into your user directory by typing
>LV CM;LF file_name
and pressing the Enter key.
where
file_name is the name of the SLM disk volume containing the file to be loaded
28 Leave the disk utility by typing
>QUIT
and pressing the Enter key.
29 Reload the ESA processor by typing
>LOADPM
and pressing the Enter key.
If
load failed
load passed
DMS-100 Family OPAC Maintenance Manual XPM12 and up
Card replacement procedures 8-49
HIE
Do
step 33
step 30
NT2X70
(continued)