Wrist Strap Grounding Cords Test Opac - Nortel DMS-100 Series Maintenance Manual

Application
Use this procedure to test the resistance of the wrist strap grounding cords.
Check that the resistance is low enough to allow static electricity to
discharge from the body of the user. Resistance must be high enough to
prevent electrocution of the user if the equipment develops a short-circuit.
Interval
Perform this procedure one time each month.
Common procedures
There are no common procedures.
Action
This procedure contains a summary flowchart and a list of steps. Use the
flowchart to review the procedure. Follow the steps to perform this
procedure.
13-87 Routine maintenance procedures
Wrist strap grounding cords test
DMS-100 Family OPAC Maintenance Manual XPM12 and up
13-87 13-87
OPAC