Supported Subscriber Line Types - Nortel DMS-100 Series Maintenance Manual

3-20 ESA maintenance overview
The user manually downloads general static data when the ESA CC is
ManB. The system loads the static data when the ESA CC is RTS. The user
only loads ESA static translations data when the ESA CC is in-service
(InSv).
Downloading the ESA processor
The following methods are used to download translation data to the ESA
processor:

Supported subscriber line types

During OPAC ESA mode, the supported subscriber line types are POTS and
MDC.
POTS line types
The supported POTS line types include the following:
297-8211-550 Standard 05.01 August 1999
manually: The LOADPM command downloads data manually to the
ESA processor.
during RTS: The RTS command downloads data automatically to the
ESA processor if the processor cannot perform call processing with
available data.
automatically: The system loads data during daily updates of the ESA
processor as the RLCM_ESADUPD_HOUR office parameter specifies.
1FR – single party flat rate.
1MR – individual message rate. The system treats lines like single party
flat rate lines.
2FR – two parties flat rate.
4FR – four parties flat rate fully selected without ANI.
8FR – eight parties flat rate semi-selective without ANI.
10FR – multiparty flat rate without ANI.
CCF – coin coin first service. The coin is returned.
CDF – coin dial tone first service. The coin is returned. The CDF
telephones cannot make 911 or 0 calls without the first coin deposit
while in ESA mode.
CSP – coin semi-postpay service. The coin is not returned. A coin is
not needed to allow a speech path.
PBX lines – PBX message rate lines are treated as PBX flat rate lines.