Nortel DMS-100 Series Maintenance Manual page 244

7-8 Alarm clearing procedures
OPAC
critical
(continued)
11
12
13
14
15
297-8211-550 Standard 05.01 August 1999
To post the OPAC with the alarm condition identified in step 4, type
>POST LCM site frame lcm
and press the Enter key.
where
site is the site name of the OPAC (alphanumeric)
frame is the frame number of the OPAC (0 to 511)
lcm is the number of the LCM unit of the OPAC
To busy both LCM units of the OPAC, type
>BSY PM
and press the Enter key.
To RTS the PM, type
>RTS PM
and press the Enter key.
If the RTS
passes
fails
To identify the OPAC that has faults, and to display the LCM by site, type
>DISP STATE SYSB LCM
and press the Enter key.
If response
does not indicate SysB LCMs
indicates SysB LCMs
To post the OPAC with the alarm condition, type
>POST LCM SYSB
and press the Enter key.
Do
step 33
step 27
Do
step 33
step 15