Nortel DMS-100 Series Maintenance Manual page 341

Alarm display
CM
.
Indication
The alarm code power and environmental system (PES) indicates a PES
alarm. The PES appears under the peripheral module (PM) subsystem
header of the alarm banner at the maintenance (MTC) level of the MAP
display. The alarm code PES indicates that the alarm occurs in an Outside
Plant Access Cabinet (OPAC).
The number (n) before PES indicates the number of PMs with this alarm.
The MAP terminal displays the following information under the PES alarm.
Information appears according to the importance of the alarm.
At the PES level of the MAP terminal, software displays the number of
OPACs in different maintenance states. The states are red, amber, green and
offline (OFFL).
The following example of a display at the PES level of the MAP terminal
shows that one OPAC is in the RED state. Two OPACs are in the AMBER
state. Three OPACs are in the GREEN state. One OPAC is in the OFFL
state:
To obtain additional information about an OPAC with a PES alarm, enter the
POST command with an appropriate parameter.
MS IOD Net
. .
Information displayed under PES
*C*
M
a blank space
Example of a MAP response:
RED AMBER
PES 1 2
DMS-100 Family OPAC Maintenance Manual XPM12 and up
7-105
PM CCS
. nPES .
M
Importance
critical
major
minor
GREEN OFFL
3 1
Alarm clearing procedures
critical, major, minor
Lns Trks Ext
. . .
7-105 7-105
PMPES
Appl
.