Shortcut Menu; Picture Search - BCS Line User Manual

69

1.3.3.7 Shortcut Menu

By right-clicking on the live view interface, you can quickly access the corresponding functional
interface and perform relevant operations, including entering the main menu, searching records
and selecting screen split mode.
Right-click on the live interface and the shortcut menu is displayed. Refer to Table 4-22 for
detailed information.
The shortcut menu is different for different models. The actual interface shall prevail.
Function
Main Menu
Search
PTZ Control
View
1/4/8/9/16/25/36
Sequence
Add Camera
Wireless Paring
Split Track
Manual Control
Live Mode
Crowd Distribution
Auto Focus
Image
Sub Port

1.3.3.8 Picture Search

Select the image of target person on the live view interface and then search by image for all the
related videos with the target person.
Step 1 Click
Step 2 Draw a searching range by the way that is instructed by onscreen prompt, and then
click OK.
● If there are less than 30 faces in the selected range, the searching starts
immediately.
Copyright © NSS Sp. z o.o.
Table 4-22
Description
Open Main Menu interface.
Open the SEARCH interface where you can search and play back
record files. For details, see "4.6 Playback and Search".
Open the PTZ interface. For details, see "1.4 PTZ".
Configure the live view screen as a single-channel layout or
multi-channel layout.
Set customized screen split mode and channels. For details, see
"1.3.5 Sequence".
Open the Add Camera interface. For details, see "1.1.4.4 Adding
Camera".
Right-click Wireless Paring to quickly add IPCs. For details, see "1.3.4
Wireless Paring".
Split the screen of a certain channel. For details, see "1.3.9 Split
Tracking".
● Select Record Mode, you can configure the recording mode as
Auto or Manual, or stop the recording. You can also enable or
disable snapshot function
● Select Alarm Mode, you can configure alarm output settings.
There are two modes: General/AI mode.
Select enable/disable to start/stop crowd distribution function.
Click to realize auto focus function. Make sure the connected camera
supports auto focus function.
Click to modify the camera properties. For details, see "1.2.4 Image".
Click Sub Port, you can go to control the sub screen.
, and the live image is frozen.
69
User's Manual