Adding Face Pictures In Batches - BCS Line User Manual

169
If the system prompts the message indicating modeling is in process, wait a while and
then click Search again. If modeling is failed, the registered face picture cannot be
used for face recognition.

1.7.3.1.3 Adding Face Pictures in Batches

System supports batch add if you want to import several human face image at the same time.
Step 1 Give a name to the face picture by referring to the following table. See Table 4-55.
Naming format
Name
Gender
Birthday
Country
ID Type
ID No.
Address
Step 2 Select Main Menu > AI > Database > Face Database Config.
The Face Database Config interface is displayed.
Step 3 Click
The Details interface is displayed. See Figure 4-176.
Step 4 On the Details interface, click Batch Register.
The Batch register interface is displayed. See Figure 4-181.
Copyright © NSS Sp. z o.o.
Figure 4-180
Table 4-55
Description
Enter the name.
Enter 1 or 2. 1 represents male, and 2 represents female.
Enter numbers in the format of yyyy-mm-dd.
Enter the abbreviation of country. For example, CN for China.
1 represents ID card; 2 represents passport; 3 represents military
officer password.
Enter the ID number.
Enter the address.
of the library that you want to configure.
169
User's Manual