BCS Line User Manual page 232

221
Step 2 Configure parameters. For details, see Table 4-69.
Parameter
IP Address
Subnet Mask
Default Gateway
Start IP
End IP
Preferred DNS
Alternate DNS
Step 3 Click Apply to complete the configuration.
1.11.5 3G/4G
Prerequisites
Make sure that 3G/4G module is installed on the device.
Copyright © NSS Sp. z o.o.
Figure 4-226
Table 4-69
Description
Set IP address, subnet mask and default gateway for the Wi-Fi
parameters of NVR.
IP address and default gateway must be in the same network
segment.
Set the start IP address and end IP address of the DHCP server.
Set preferred/alternate DNS server of the DHCP server.
221
User's Manual