Pir Alarm - BCS Line User Manual

User's Manual
Step 2 To configure the settings for the scene change parameters, see "1.8.5.1 Motion
Detection".
Step 3 The scene change function does not have region and sensitivity items.
Step 4 Click Apply to complete the settings.
● Click Default to restore the default setting.
● Click Copy to, in the Copy to dialog box, select the additional channel(s) that you
want to copy the motion detection settings to, and then click Apply.

1.8.5.5 PIR Alarm

When the detected scene has changed, system can generate an alarm.
PIR function helps enhancing the accuracy and validity of motion detect. It can filter the
meaningless alarms that are activated by the objects such as falling leaves, flies. The detection
range by PIR is smaller than the field angle.
PIR function is enabled by default if it is supported by the cameras. Enabling PIR function will
get the motion detect to be enabled automatically to generate motion detection alarms; if the
PIR function is not enabled, the motion detect just has the general effect.
Step 1 Select Main Menu > ALARM > Video Detection > PIR Alarm.
The PIR Alarm interface is displayed. See Figure 4-197.
Figure 4-196
186
Copyright © NSS Sp. z o.o.
186