Configuring Patterns - BCS Line User Manual

89
Step 3 In the Tour No. box, enter the value for the tour route.
Step 4 In the Preset box, enter the preset value.
Step 5 Click Add Preset.
A preset will be added for this tour.
● You can repeat adding more presets.
● Click Delete Preset to delete the preset for this tour. This operation can be
repeated to delete more presets. Some protocols do not support deleting.

1.4.3.3 Configuring Patterns

Step 1 On the expanded PTZ control panel, click
The PTZ interface is displayed.
Step 2 Click the Pattern tab.
The Pattern interface is displayed. See Figure 4-98.
Copyright © NSS Sp. z o.o.
Figure 4-97
.
89
User's Manual