Basic; Schedule; Disk Manager - BCS Line User Manual

User's Manual

1.12.1 Basic

You can set basic storage parameters.
Step 1 Select Main Menu > STORAGE > BASIC.
The Basic interface is displayed. See Figure 4-243.
Step 2 Set parameters. See Table 4-79.
Parameter
Disk Full
Create Video Files
Delete Expired
Files
Step 3 Click Apply or Save to complete setup.

1.12.2 Schedule

You can set schedule record and schedule snapshot. NVR can record or snapshot as you
specified. For detailed information, refer to "1.1.4.6.1 Recording Schedule" and "1.1.4.6.2
Snapshot Schedule".

1.12.3 Disk Manager

You can view and sett HDD properties and format HDD.
You can view current HDD type, status, capacity and etc. The operation includes format HDD,
and change HDD property (read and write/read-only/redundancy).
● To prevent files be overwritten in the future, you can set HDD as read-only.
● To backup recorded video file, you can set HDD as redundant HDD.
Step 1 Select Main Menu > Storage > Disk Manager.
The Disk Manager interface is displayed. See Figure 4-244.
Figure 4-243
Table 4-79
Description
Configure the settings for the situation all the read/write discs are full,
and there is no more free disc.
● Select Stop Record to stop recording
● Select Overwrite to overwrite the recorded video files always
from the earliest time.
Configure the time length and file length for each recorded video.
Configure whether to delete the old files and if yes, configure the
days.
Deleted files cannot be recovered!
238
Copyright © NSS Sp. z o.o.
238