System; General - BCS Line User Manual

User's Manual
Step 2 Set parameters.
Parameter
Server Address
Port
Storage Path
Username,
Password
Step 3 Click Apply.

1.13 System

1.13.1 General

You can set device general information. It includes device information, system date. Refer to
"1.1.4.1 General" for detailed information.
Figure 4-263
Table 4-82
Description
Enter the server address of iSCSI server.
Enter the port of iSCSI server, and the default value is 3260.
Click Storage Path to select a remote storage path.
Each path represents an iSCSI shared disk and these paths are
generated when created on the server
Enter the username and password of iSCSI server.
If anonymous login is supported by iSCSI server, you can enable
Anonymous to log in as an anonymous user.
254
Copyright © NSS Sp. z o.o.
254