BCS Line User Manual page 35

User's Manual
1) Tap Device Manager.
The Device Manager interface is displayed. See Figure 4-24.
2) Tap on the top right corner.
The interface requiring device initialization is displayed. A pop-up message
reminding you to make sure the Device is initialized is displayed.
3) Tap OK.
● If the Device has not been initialized, Tap Device Initialization to perform
initializing by following the onscreen instructions.
● If the Device has been initialized, you can start adding it directly.
4) Tap Add Device.
The Add Device interface is displayed. See Figure 4-25.
Figure 4-24 Device manager
24
Copyright © NSS Sp. z o.o.
24