System Service; Basic Services - BCS Line User Manual

User's Manual
Scanning Security Modules
This area shows the running status of security modules. For details about the security modules,
move mouse pointer on the icon to see the on-screen instructions.
Scanning Security Status
You can click Rescan to scan security status.

1.14.2 System Service

You can set NVR basic information such as basic services, 802.1x and HTTPS.

1.14.2.1 Basic Services

Step 1 Select Main Menu > SECURITY > System Service > Basic Services.
The Basic Services interface is displayed. See Figure 4-268.
Step 2 Select Basic Services and configure parameters.
There might be safety risk when Mobile Push Notifications, CGI, ONVIF, SSH and
NTP Server is enabled.
Parameter
Figure 4-267
Figure 4-268
Table 4-84 Basic service parameters
258
Description
Copyright © NSS Sp. z o.o.
258