BCS Line User Manual page 281

User's Manual
Step 2 Select Enable and configure parameters. See Table 4-93.
Parameter
Alarm-out Port
Post Alarm
Buzzer
Alarm Tone
Log
Send Email
Figure 4-280 Illegal Login
Table 4-93 Illegal login parameters
Description
The alarm device (such as lights, sirens, etc.) is connected to the
alarm output port. When an alarm occurs, the NVR device transmits
the alarm information to the alarm device.
When the alarm ends, the alarm extended for a period of time. The
time range is from 0 seconds to 300 seconds.
Select the check box to activate the buzzer when an alarm occurs.
Check the box and then select the corresponding audio file from the
dropdown list. System plays the audio file when the alarm occurs.
See "4.17.1 File Management" to add audio file first.
Select the check box, the NVR device records the alarm information in
the log when an alarm occurs.
Select the check box. When an alarm occurs, the NVR device sends
an email to the set mailbox to notify the user.
You need to set the email first. For details, see "4.11.10 Email".
270
Copyright © NSS Sp. z o.o.
270