Date And Time - BCS Line User Manual

User's Manual
Parameter
Mouse Sensitivity
Step 3 Click Apply button to save settings.

1.1.4.1.2 Date and Time

You can set device time. You can enable NTP (Network Time Protocol) function so that the
device can sync time with the NTP server.
You can also configure date and time settings by selecting Main Menu > SYSTEM > General >
Date&Time.
Step 1 Click Date&Time tab. See Figure 4-18.
Step 2 Configure the settings for date and time parameters. See Table 4-4.
Parameter
System Time
Time Zone
Date Format
Description
Adjust the speed of double-click by moving the slider.
The bigger the value is, the faster the speed is.
Figure 4-18
Table 4-4 Data and time parameters
Description
In the System Time box, enter time for the system.
Click the time zone list, you can select a time zone for the
system, and the time in adjust automatically.
Do not change the system time randomly; otherwise the
recorded video cannot be searched. It is recommended to avoid
the recording period or stop recording first before you change
the system time.
In the Time Zone list, select a time zone for the system.
In the Date Format list, select a date format for the system.
16
Copyright © NSS Sp. z o.o.
16