Anpr - BCS Line User Manual

155
◇
◇
2. Click Apply to save the settings.
Step 5 Click Apply button to complete setup.

1.7.2.9 ANPR

System uses the video recognition technology to extract the plate number on the surveillance
video and then compare it with the specified plate information. System can trigger an alarm
once there is a matched result.
You can set different plate recognition rule, alarm linkage actions in different environments
(blacklist, whitelist and regular).
Step 1 Select Main Menu > AI > Parameters > ANPR.
The ANPR interface is displayed. See Figure 4-165.
Step 2 Select the Enable check box to enable ANPR.
Step 3 Click General (default), Blacklist or Whitelist tab to configure it.
Before activate blacklist alarm or whitelist alarm, you need to add the corresponding
plate information. Refer to "1.7.3.3 Black/whitelist" for detailed information.
● Regular: Device triggers an alarm when it detects any plate number.
● Blacklist: Device triggers an alarm when it detects plate number in the blacklist.
● Whitelist: Device triggers an alarm when it detects plate number in the whitelist.
Step 4 Set parameters. See Table 4-50.
Copyright © NSS Sp. z o.o.
There are six periods for you to set for each day.
Under Copy, select All to apply the settings to all the days of a week, or
select specific day(s) that you want to apply the settings to.
Figure 4-165
155
User's Manual