Ca Certificate; Device Certificate - BCS Line User Manual

265
Parameter
Add
Type
IP Address
Start Address
End Address
Step 4 Click Apply to complete the settings.

1.14.4 CA Certificate

1.14.4.1 Device Certificate

Create Certificate
1. Select Main Menu > SECURITY > CA Certificate > Device Certificate.
The Device Certificate interface is displayed. See Figure 4-275.
2. Configure parameters. See Table 4-89.
Parameter
County
State
City Name
Valid Period
Copyright © NSS Sp. z o.o.
Table 4-88 Sync Time-Whitelist parameters
Description
You can add trusted hosts for time synchronization.
Select IP address or IP segment for hosts to be added.
Input the IP address of a trusted host.
When Type is IP Address, it can be configured
Input the start IP address of trusted hosts.
When Type is IP Segment, it can be configured
Input the end IP address of trusted hosts.
When Type is IP Segment, it can be configured
Figure 4-275 Device Certificate
Table 4-89 Creating certificate
Description
This parameter is user defined.
This parameter is user defined.
This parameter is user defined.
Input a valid period for the certificate.
265
User's Manual