BCS Line User Manual page 26

15
Step 2 Set parameters. See Table 4-3.
Parameter
Device Name
Device No.
Language
Video Standard
Sync Remote Device
Instant Playback
Logout Time
CAM Time Sync
Interval
Logout Time
Navigation Bar
Copyright © NSS Sp. z o.o.
Figure 4-17 Basic settings
Table 4-3 Basic parameters
Description
In the Device Name box, enter the Device name.
In the Device No. box, enter a number for the Device.
In the Language list, select a language for the Device system.
In the Video Standard list, select PAL or NTSC according to your
actual situation.
Enable this function; the NVR can synchronize information with
the remote device such as Language, video standard, time zone.
In the Instant Play box, enter the time length for playing back the
recorded video. The value ranges from 5 to 60.
On the live view control bar, click the instant playback button to
play back the recorded video within the configured time.
In the Auto Logout box, enter the standby time for the Device.
The Device automatically logs out when it is not working for the
configured time period. You need to login the Device again.
The value ranges from 0 to 60. 0 indicates there is not standby
time for the Device.
Click Monitor Channel(s) when logout. You can select the
channels that you want to continue monitoring when you logged
out.
Syncs the Device time with IP camera.
In the Interval box, enter the interval for time sync.
You can set auto logout interval once login user remains inactive
for a specified time. Value ranges from 0 to 60 minutes.
Enable the navigation bar. When you click on the live view screen,
the navigation bar is displayed.
15
User's Manual