Https - BCS Line User Manual

User's Manual
Step 2 Select the Ethernet card you want to certify.
Step 3 Select Enable and configure parameters. See Table 4-85.
Parameter
Authentication
CA Certificate
Username
Password
Step 4 Click Apply to complete the settings.

1.14.2.3 HTTPS

We recommend that you enable HTTPS function to enhance system security.
Step 1 Select Main Menu > SECURITY > System Service > HTTPS.
The HTTPS interface is displayed. See Figure 4-270.
Figure 4-269
Table 4-85 802.1x parameters
Description
● PEAP: protected EAP protocol.
● TLS: Transport Layer Security. Provide privacy and data
integrity between two communications application programs.
Enable it and click Browse to import CA certificate from flash
drive. For details about importing and creating a certificate, see
"4.14.4 CA Certificate".
The username shall be authorized at server.
Password of the corresponding username.
260
Copyright © NSS Sp. z o.o.
260