Video Tampering - BCS Line User Manual

183
2. Enter the time frame for the period, and then select the check box to enable the
settings.
◇
◇
3. Click OK to save the settings.
Step 3 On the Motion Detection interface, click Apply to complete the settings.

1.8.5.2 Video Tampering

When the camera lens is covered, or the video is displayed in a single color because of sunlight
status, the monitoring cannot be continued normally. To avoid such situations, you can
configure the tampering alarm settings.
Step 1 Select Main Menu > ALARM > Video Detection > Video Tampering.
The Video Tampering interface is displayed. See Figure 4-194.
Copyright © NSS Sp. z o.o.
Figure 4-193
There are six periods for you to set for each day.
Under Copy to, select All to apply the settings to all the days of a week, or
select specific day(s) that you want to apply the settings to.
183
User's Manual