Configuration Upnp - BCS Line User Manual

227
Step 3 Connect the Device with the LAN port on the router to connect into the LAN.
Step 4 Select Main Menu > NETWORK > TCP/IP, configure the IP address into the router IP
address range, or enable the DHCP function to obtain an IP address automatically.

1.11.9.2 Configuration UPnP

Step 1 Select Main Menu > NETWORK > UPnP.
The UPnP interface is displayed. See Figure 4-233.Figure 4-233
Step 2 Configure the settings for the UPnP parameters. See Table 4-72.
Parameter
Port Mapping
Copyright © NSS Sp. z o.o.
Figure 4-234
Table 4-72
Description
Enable the UPnP function.
227
User's Manual