User's Manual
1.8.5.1.2 Setting Schedule
The system only activates the alarm in the defined period.
Step 1
Next to Schedule, click Setting.
The Setting interface is displayed. See Figure 4-192.
Step 2
Define the motion detection period. By default, it is active all the time.
● Define the period by drawing.
Define for a specified day of a week: On the timeline, click the half-hour blocks
◇
to select the active period.
Define for several days of a week: Click
◇
to
the active periods, all the days with
Define for all days of a week: Click All, all
◇
of any day, click the half-hour blocks to select the active periods, all the days
will take the same settings.
● Define the period by editing. Take Sunday as an example.
1. Click
The Period interface is displayed. See Figure 4-193.
Figure 4-192
. On the timeline of any selected day, click the half-hour blocks to select
.
182
before each day, the icon switches
will take the same settings.
switches to
. On the timeline
Copyright © NSS Sp. z o.o.
182
Need help?
Do you have a question about the Line and is the answer not in the manual?