Face Detection - BCS Line User Manual

User's Manual
2. Select a preset.
3. Click the smart plan icon at the bottom left. The icon becomes highlighted.
4. Click Apply.
◇
◇
● Once the remote device does not support preset function, the interface is shown
as in Figure 4-135.
1. Select a channel.
2. Click the smart plan icon. The icon becomes blue highlighted.
3. Click Apply.

1.7.2.2 Face Detection

The Device can analyze the pictures captured by the camera to detect whether the faces are on
the pictures. You can search and filter the recorded videos the faces and play back.
The connected camera shall support human face detection function.
Procedure
Step 1 Select Main Menu > AI > Parameters > Face Detection.
The Face Detection interface is displayed. See Figure 4-136.
Click to delete the preset.
Click Add to add a preset.
Figure 4-135
124
Copyright © NSS Sp. z o.o.
124