Navigation Bar - BCS Line User Manual

User's Manual

1.3.2 Navigation bar

You can quickly perform operation through the icon on the navigation bar.
● Different series products may display different navigation bar icons. Refer to the actual
product for detailed information.
● Select Main Menu > SYSTEM > General > Basic to enable navigation bar function and
then click Apply; otherwise you cannot see the following interface.
Click the live view interface. You can see navigation bar. See Figure 4-65. Refer to Table 4-21
to view detailed information.
Icon
Figure 4-65
Table 4-21
Function
Open Main Menu.
Expand or condense the navigation bar.
Select view layout.
Go to the previous screen.
Go to the next screen.
Enable tour function. The icon switches to
Close the tour or the triggered tour operation has canceled,
and device restores the previous preview video.
Open the PTZ control panel. For details, see "1.4.2 PTZ
Control".
Open the Color Setting interface. For details, see "1.4.2 PTZ
Control".
This function is supported only in single-channel layout.
Open the record search interface. For detail, see "1.6.2
Search Interface".
Open the Voice Broadcast interface. For detail, see"1.17.3
Broadcast".
Open the Alarm Status interface to view the device alarm
status. For details, see "1.8.2 Alarm Status".
Open the Channel Info interface to display the information of
each channel. For details, see "1.3.2.1 Channel Info".
Open the Add Camera interface. For details, see "1.1.4.4
Adding Camera".
Open the NETWORK interface. For details, see "1.10.3
Network".
62
Copyright © NSS Sp. z o.o.
62
.