Upnp; Configuring Router - BCS Line User Manual

User's Manual
Step 2 Configure the settings for the DDNS parameters. See Table 4-71.
Parameter
Enable
Type
Server Address
Domain Name
User Name
Password
Interval
Step 3 Click Apply to complete the settings.
Enter the domain name in the browser on your PC, and then press Enter.
If the web interface of the Device is displayed, the configuration is successful. If not,
the configuration is failed.

1.11.9 UPnP

You can map the relationship between the LAN and the WAN to access the Device on the LAN
through the IP address on the WAN.

1.11.9.1 Configuring Router

Step 1 Log in to the router to set the WAN port to enable the IP address to connect into the
WAN.
Step 2 Enable the UPnP function on the router.
Figure 4-232
Table 4-71
Description
Enable the DDNS function.
After enabling DDNS function, the third-party might collect your
Device information.
Type and address of DDNS service provider.
● Type: Dyndns DDNS; address: members.dyndns.org
● Type: NO-IP DDNS; address: dynupdate.no-ip.com
● Type: CN99 DDNS; address: members.3322.org
The domain name for registering on the website of DDNS service
provider.
Enter the user name and password obtained from DDNS service
provider. You need to register (including user name and password) on
the website of DDNS service provider.
Enter the amount of time that you want to update the DDNS.
226
Copyright © NSS Sp. z o.o.
226