Schedule - BCS Line User Manual

31
Step 3 You can click Create RAID or Create Manually, and all the disks involved will be
formatted.
● Click Create RAID, the system will create RAID automatically.
If there is no existing RAID and no hot spare disk, the system will create RAID5
◇
and a hot spare disk automatically.
If there is no existing RAID, but existing hot spare disk, the system will only
◇
create RAID5 and use the existing hot spare disk automatically.
If there is existing RAID and existing hot spare disk, the system will delete the
original RAID and create RAID5 with all the disks and use the existing hot spare
disk automatically.
● Click Create Manually.
1. Select RAID type and disks as system instructed.
2. Click Create Manually, and then the format disk notice is displayed.
3. Click OK.
Step 4 After creating RAID, the disks need to sync with each other to finish the process. For
RAID5 and RAID6, you can select different working mode.
● Self-Adaptive: Automatically adjust the RAID sync speed according to the
business status.
● Sync First: Resource priority is assigned to RAID sync.
● Business First: Resource priority is assigned to business operations.
● Balance: Resource is evenly distributed to RAID sync and business operations.

1.1.4.6 Schedule

After setting record schedule and snapshot schedule, the device can automatically record
video and snapshot image at the specified time.
Select Main Menu > STORAGE > Schedule, you can go to the Schedule interface.
Copyright © NSS Sp. z o.o.
Figure 4-32
31
User's Manual