Fixing System - Canon LBP1760P Service Manual

VI. FIXING SYSTEM
A. Fixing Unit
1. Configuration
A cross-section of the fixing unit, the appa-
ratus that fuses the toner to the print
paper, is shown below.
1
6 5
Deflector
Fixing film unit
Fixing unit entrance guide
Fixing heater
Pressure roller
Fixing unit delivery roller
Figure 3-6-1
2
4 3
2. Removal from the printer
1) Turn the power OFF, then unplug the
power cord.
2) Remove the face-up tray.
3) Unhook the claw and then remove the
right bottom cover.
4) Unhook the claw and then remove the
left bottom cover.
Claw Right bottom cover
Left bottom cover
Figure 3-6-2
5) Remove the 2 screws and pull out the
fixing unit.
Screws Fixing unit
Figure 3-6-3
CHAPTER 3
3 - 23