6.3.3 Setting the pump running mode
A case of display if Normal mode selected.
SET
RUNNING MODE?
LOW SPEED MODE : Enables low speed operation
NORMAL MODE : Enables the rated operation.
The mode that is currently not set is displayed.
If you do not need to set, press PRG. key to go back to the previous screen.
6.3.4 Setting the BP normal rotational speed
SET BP
NORMAL SPEED?
△ ▽
△ : Increase the setting speed by 0.1 kmin
▽ : Decrease the setting speed by 0.1 kmin
Upper limit
Lower limit
Factory Setting : 7.0 kmin
6.3.5 Setting the rotational speed in the LOW SPEED mode
SET BP
LOW SPEED?
△ ▽
△ : Increase the setting speed by 0.1 kmin
▽ : Decrease the setting speed by 0.1 kmin
Upper limit
Lower limit
Factory Setting : 3.0 kmin
PM10U
PRG.
ENTER
LOW SPEED MODE?
BP NORMAL SPEED
ENTER
#.# kmin
PRG.
:Use the up and down arrow keys to change the setting value.
-1
: 7.0 kmin
-1
: 3.0 kmin
-1
BP LOW SPEED
ENTER
#.# kmin
PRG.
Use the up and down arrow keys to change the setting value.
-1
: 7.0 kmin
-1
: 1.0 kmin
-1
-1
Use the keys, "△" and "▽" to set.
-1
.
-1
-1
Use the keys, "△" and "▽" to set.
-1
.
-1
Setting
ENTER
Completed
ENTER
Setting Completed
ENTER
Setting Completed
EBARA
CORPORATION
P.33