Setting The Pump Running Mode; Setting The Rotational Speed In The Normal Mode - EBARA EV-S20 Instruction Manual

5.3.3 Setting the pump running mode

SET
RUNNING MODE?
S.ENERGY MODE: Enables the energy-saving operation
NORMAL MODE: Enables the rated operation.
The mode which is currently not set is displayed.
If you do not need to set, press the key
PRG. to go back to the previous screen.

5.3.4 Setting the rotational speed in the Normal mode

PRG.
SET
NORMAL SPEED?
▲ ▼
▲: Increase the setting speed by 0.1 kmin
▼: Decrease the setting speed by 0.1 kmin
Upper limit MP/BP: The value lower than the set value for the rated speed
Lower limit MP/BP: 4.0 kmin
PM10U
PRG.
ENTER
PRG.
SET MP
ENTE
NORMAL SPEED?
△
▽
SET BP
NORMAL SPEED?
Use the up and down arrow keys to change the setting value.
S.ENERGY MODE?
NORMAL MODE?
NORMAL SPEED
ENTE
MP #．# kmin
Use the keys, "▲" and "▼" to set.
NORMAL SPEED
ENTE
BP #．# kmin
Use the keys, "▲" and "▼" to set.
-1
.
-1
-1
Setting done
ENTER
Setting done
ENTER
Setting
ENTE
-1
done
Setting
ENTE
-1
done
EBARA
CORPORATION
P.64