Advertisement
Printing Overview
file:///C|/Documents%20and%20Settings/Miz%20B/My%2...TA/Nuvera%209.0%20UGTA_FINAL/English/hdi_p_000.htm (2 of 2)8/13/2008 2:17:06 PM
Tab job with drilled
For MFF configurations only: When running a tab job with pre-drilled paper for the main body pages, the pre-
paper (MFF
drilled paper must be loaded with the holes leading, which is opposite of what the label on the tray indicates.
configs. only)
When paper runs
When printing a job, if it runs out of paper, do not restart/shutdown the machine. If you do, the job may resume on
out, do not restart
the wrong orientation paper. Example: If your job was printing on Letter LEF and ran out, the system was
or shut down
restarted, the job may resume printing on Letter SEF. As a work around, disable any trays of the wrong orientation
before the restart/shutdown or fill the correct tray before the restart/power up completes.
Sample Print
If you want to print a job from the Print From File Service and use the Sample Print feature, submit the job to the
Hold queue, open the job, and select Sample Print from the Job Properties window. You could also add Sample
Print to a queue as an override. Sample Print is not available for selection from the Print From File screens.
71 of 256
Advertisement
