Advertisement
|
Home
How Do I?
file:///C|/Documents%20and%20Settings/Miz%20B/My%20D...%20UGTA/Nuvera%209.0%20UGTA_FINAL/English/cru_10.htm8/13/2008 1:45:43 PM
|
Resources
|
System Tour
Replacing the Developer Waste
Container
The Developer Waste Container gets replaced after every
800,000 images. When the machine has reached the limit set
for the Developer Waste Container, an alert will appear in the
system messages portion of the user interface.
To replace the Developer Waste container
Double-click the system alert to see details about the action
needed, instructions on how and where to return the used
container, as well as the location of the container.
See
Contacting Xerox
to get the correct part number for this
container.
Make sure there are no jobs running.
1. Open the front access covers and identify the correct
container.
2. Prepare the new container for installation.
3. Remove the used container.
4. Insert the new container, making sure it is completely
seated.
5. Package the used container for return. Use the box
and prepaid return label to return the old unit to Xerox.
|
Search
|
Problem Solving
221 of 256
|
Index
About this Site
|
Maintenance
Videos
Replacing the Developer Waste
Container
Advertisement
