Advertisement
|
Home
How Do I?
file:///C|/Documents%20and%20Settings/Miz%20B/My%...GTA/Nuvera%209.0%20UGTA_FINAL/English/adv_035.htm (1 of 2)8/13/2008 1:35:56 PM
|
Resources
|
System Tour
Using Front-Back Registration
This feature enables customized, independent, Side-1 and Side-2 registration fine-tuning for a specific stock saved and stored within
the stock library.
Due to the high levels of differences among stock characteristics that affect image to substrate performance, the system allows custom
registration settings to be stored as custom media properties. These settings are applied on a per sheet basis as an offset to the
baseline System Registration Setup values from the DC0604 Registration Setup Routine.
The custom registration settings include process registration, cross-process registration, and skew. These registration settings are
saved with the stock name in the media library. This feature allows the customer to fine-tune the front-back registration for a particular
stock without affecting the registration for all other stocks.
The Front-Back Registration window
The Front-Back Registration window displays a list of all media in the stock library. Any media currently loaded on the printer is at the
top of the Media Name list with a checkmark in the adjacent Loaded column. When the Front-Back Registration values change from
the media default settings, an icon appears in the Modified column to aid as a quick reference.
The following attributes can be changed:
Process Direction registration - Side 1 and/or Side 2: +/- 5.0 mm
Cross Process Direction registration - Side 1 and/or Side 2: +/- 5.0 mm
Skew - Side 1 and/or Side 2: +/- 25mRadians
Selecting Rotate both sides applies the same skew factor to Side 1 and Side 2.
To use Front-Back Registration
1. On the Printer menu, select Front-Back Registration.
2. Select the media you want to modify.
3. Change the media attributes.
4. Select Apply to accept the changes.
5. If you make selections but you don't want to apply them, click Default to return the media settings to 0, or click Cancel to
return the media settings to the previously-applied values.
NOTE: The Enable Front-Back Registration checkbox is selected by default.When it is not selected, the software does not
use the information stored in the database associated with any Front-Back registration changes. The values remain at their
latest applied values, but they are not used by the registration system if the feature is disabled. This allows the customer to
disable the feature without having to reset the information back to 0.
|
Search
|
Problem Solving
108 of 256
|
Index
About this Site
|
Maintenance
Advertisement
