Advertisement
file:///C|/Documents%20and%20Settings/Miz%20B/My%20D...UGTA/Nuvera%209.0%20UGTA_FINAL/English/hdi_c_030.htm8/13/2008 2:08:44 PM
Adjusting Output Page Size
You can print your copy to a different sized paper stock. There are two ways to accomplish this:
Auto Paper Selection (APS)
Manual stock size selection
1. With APS, you can program the job, load documents in the Document Feeder or on the Document Glass, and the machine
automatically selects the appropriate paper/tray for the job. The system determines the original document size and uses this in
combination with other features such as
matching paper tray to feed from. The system does all this without losing any part of the page image. It will always choose a
paper/tray that is white, buff or ivory in color; has a weight of normal or medium (56 – 105 gsm); and has a type of either plain
or recycled. If the Reduce/Enlarge is equal to 100%, and the correct size paper or tray is not available (either the paper tray is
empty, raising, disabled or left open) a programming conflict will appear stating that APS is selected and no tray is ready with
the correct paper stock. If the Reduce/Enlarge is not equal to 100%, it will choose a larger size paper/tray if the correct size
paper/tray is not available.
2. You can override the default APS feature by manually selecting an output stock size. On the Home Screen, click the Paper
Trays button, select a tray, and right-click to enable one of the tray selections.
NOTE: The APS feature is active by default. APS applies to copy jobs only.
See also:
See
Supported Paper
for details on paper sizes and types you can use with the Xerox Nuvera.
Reduce / Enlarge
and
Rotation
38 of 256
to determine the output paper size and select the best
Advertisement
