Advertisement
file:///C|/Documents%20and%20Settings/Miz%20B/My%2...Nuvera%209.0%20UGTA_FINAL/English/hdi_c_df_000.htm (1 of 2)8/13/2008 2:14:07 PM
Using the Document Feeder
NOTE: This feature is only available if your system
includes the integrated Document Scanner module for
copying and scanning jobs.
The Xerox Nuvera is equipped with a Document Feeder,
allowing you to quickly scan large document sets into the
system for processing.
For more information on the capabilities of the Document
Feeder, see
Document Feeder and Scanner
To load the Document Feeder
NOTE: To ensure all image information from a 12 x 18
inch original is captured, use the Document Glass.
NOTE: Follow the steps below to avoid misfeeds and/or
skewed output. The document feeder side guides must
be positioned correctly to avoid misaligned copies or
scans.
1. Remove any staples, paper clips, etc. that may be
binding the paper set.
2. Move the side guides outward as far as they will go.
3. Place the document set to be scanned or copied face
up in the center of the document feeder input tray.
Make sure the document set is neatly stacked to avoid
skewing. For more information on paper loading (type
and feed direction), see
Document Feeder and
Scanner
Specifications.
4. Move the side guides inward. Make sure the paper
guides are touching both sides of the paper stack.
Failure to do so may result in sheets skewing and
skewed images on copies or scans.
5. Make any programming choices in the user interface.
6. Click <Start>.
If a jam occurs in the Document Feeder, see
Jams in the Document
Feeder.
Specifications.
Clearing Paper
41 of 256
Video
Scanning from the Document
Feeder
Scanning from the Document Glass
Advertisement
