Advertisement
Finisher Specifications
file:///C|/Documents%20and%20Settings/Miz%20B/My%...GTA/Nuvera%209.0%20UGTA_FINAL/English/spec_40.htm (4 of 4)8/13/2008 4:44:15 PM
Select the Multiple Finishing option from the same Finishing area on the FreeFlow Print Server to simultaneously select stapling and
hole punching for the job.
Paper Specifications for the Hole Punch Module
Type
Size
171-321mm (6.74-12.63 in) width
2-punch
148-457mm (5.83-17.99 in) length
232-321mm (9.14-12.63 in) width
3-punch
148-457mm (5.83-17.99 in) length
255-321mm (10.04-12.63 in) width
4-punch
148-457mm (5.83-17.99 in) length
Insertion Tray Capacities
The MFF Insertion Tray specifications are:
Holds and feeds up to 200 sheets of 20 lb bond (75 gsm), all same stock size
Accepts media weight of 56 - 220 gsm
Accepts sizes of 176-470 mm (6.93 - 18.5 in) length and 176-298 mm (6.93 x 11.73 in) width
For more information about loading special stock such as tabs, refer to
Configurations
The MFF is the basic configuration on the Xerox Nuvera EA Production System and is the only configuration that does not include the
Sheet Enhancement Module (SEM). The Sheet Enhancement Module is a standard component on systems with a BFM or FTM.
The diagrams below show the MFF finishing configuration options.
Print Engine / MFF Professional (can include an SFM Insertion Module)
Print Engine / MFF Pro Plus (can include an SFM Insertion Module)
Weight
56-200 gsm
56-200 gsm
56-200 gsm
Loading Special Stock for Proper Finishing Output
177 of 256
Advertisement
