Advertisement
|
Home
How Do I?
file:///C|/Documents%20and%20Settings/Miz%20B/My%20D...0UGTA/Nuvera%209.0%20UGTA_FINAL/English/clean_10.htm8/13/2008 1:38:18 PM
|
Resources
|
System Tour
Cleaning the Document Glass
In order to produce high-quality images, free from defects, it's important to keep the Xerox Nuvera clean.
Depending on your work environment, you may need to perform these steps frequently.
There are two areas that comprise the Document Glass:
Document Feeder Scan Area
Main Document Glass
Spots and specks in the Document Feeder Scan Area can show up as streaks on copies made when using the Document Feeder.
Additionally, dirt on the Document Glass can show up as spots on copies made from the Document Glass.
Specks and dirt can cause image detection problems. The scanner may interpret contamination as part of the image, and produce
faulty copies.
To clean the document glass
To avoid damage to the machine, do not pour or spray water or cleaner directly on the document glass of the Xerox
Nuvera. Do not use any abrasive cleaners to clean the document glass of the Xerox Nuvera.
Recommended cleaning materials:
Soft, lint-free cleaning towels (part # 600S4372).
Xerox Glass Lens and Mirror Cleaner
For information on ordering supplies, see
1. Apply cleaner to the cleaning towel.
2. Wipe the entire Document Glass with the dampened towel, until the glass is free of dirt and smudges.
3. Wipe the Document Feeder Scan area on the far left side of the glass. Wipe in one direction along the divider strip.
4. Using a clean, dry cleaning towel, wipe away any cleaner residue.
5. See
Cleaning the Document
|
Search
|
Problem Solving
CAUTION!
(part # 8R3669).
Contacting
Xerox.
Feeder.
214 of 256
|
Index
About this Site
|
Maintenance
Advertisement
