Advertisement
|
Home
How Do I?
file:///C|/Documents%20and%20Settings/Miz%20B/My%20...UGTA/Nuvera%209.0%20UGTA_FINAL/English/admin_30.htm8/13/2008 11:23:08 AM
|
Resources
|
System Tour
Reading the Billing Meters
Following are descriptions of what each Billing Meter is tracking. Make sure you have correctly identified your region.
Billing Regions
Region 1
Region 2
NASG-US
ESG
DMO-E
DMO-W
China
APO
Descriptions of Billing Meters
Billing Region 1
Meter A -Represents total impressions to output destination.
Meter B -Represents total impressions for each image of job up to and including the last sheet of the 10th set.
Meter C -Total impressions for all jobs that reach a breakpoint value.
Meter D -Total impressions for all images of a job above a breakpoint value.
Meter E - Total impressions printed on sheets wider than 16 " (Nuvera 288 Perfecting System only)
Billing Region 2
Meter 1 -Total impressions to output destination.
Meter 2 -Total impressions printed on sheets wider than 16 ".
Meter 3 -Total impressions for sets 11-18.
Meter 4 -Total impressions for set 19.
Meter 5 -Total impressions for all jobs that reach a breakpoint value.
Meter 6 - Total impressions for all images of a job above a breakpoint value.
Billing Region 3
Meter A -Represents total impressions to output destination.
Meter B -Total impressions for all jobs that reach a breakpoint value.
Meter C -Total impressions for all images of a job above a breakpoint value.
Meter D - Total impressions printed on sheets wider than 16" (Nuvera 288 Perfecting System only)
Billing Region 4
Meter 1 -Represents total impressions to output destination.
Meter 2 -Total impressions for each image of a job up to and including the last sheet of the 10th set.
Meter 3 -Total impressions printed on sheets wider than 16 " (Nuvera 288 Perfecting System only).
|
Search
|
Problem Solving
Region 3
NASG-CAN
143 of 256
|
Index
About this Site
|
Maintenance
Region 4
FX
FXAP
Advertisement
