Advertisement
|
Home
file:///C|/Documents%20and%20Settings/Miz%20B/My%20D...0UGTA/Nuvera%209.0%20UGTA_FINAL/English/imgedt30.htm8/13/2008 2:22:26 PM
|
Resources
|
System Tour
Rotating the Image
You may be faced with situations where you need to rotate the original image before it is printed on the output page.
To manually rotate the image
You can rotate an image from the Image Edit tab of the Job Manager. Select the Rotation button and the rotation value.
You might want to manually rotate the image when:
copying a document that has damaged lead edges that experiences difficulty feeding properly through the document feeder
using some 3rd party finishing so that the finishing is applied correctly to the job
using special stocks that can be loaded only in a certain way in the paper trays (for example, tab stock can only be loaded
with tabs trailing)
Automatic Image Rotation
The Xerox Nuvera automatically rotates the full page image, if necessary, to match the orientation of the paper loaded in the paper
trays. Thus, you do not have to manually rotate originals or paper stock to get the correct orientation.
|
Search
|
Problem Solving
102 of 256
|
Index
About this Site
|
Maintenance
Advertisement
