Advertisement
|
Home
file:///C|/Documents%20and%20Settings/Miz%20B/My%20D...0UGTA/Nuvera%209.0%20UGTA_FINAL/English/hdi_iq40.htm8/13/2008 2:17:02 PM
|
Resources
System Tour
Adjusting Contrast
(when scanning or copying)
There are seven contrast levels which control the appearance of fine detail in the final output image.
The solution to getting the image to look good, without creating image quality problems, is to increase or decrease contrast in small
increments. See
About the Contrast
To adjust contrast
1. In the Xerox Nuvera user interface, click the Copy button.
2. Click the Image Quality tab.
3. Click the Image Adjustments button.
4. Move the slider right or left to increase or decrease (respectively) the amount of contrast.
TIP: It is best to proof a job when you make image quality adjustments.
TIP: Depending on your system configuration and licenses, system defaults and queue settings may be used to set contrast.
See
Working with Queues.
|
Search
|
Problem Solving
control.
64 of 256
|
Index
About this Site
|
Maintenance
Advertisement
