Advertisement
Replacing Staples
file:///C|/Documents%20and%20Settings/Miz%20B/My%...UGTA/Nuvera%209.0%20UGTA_FINAL/English/cru_30.htm (2 of 2)8/13/2008 2:08:43 PM
Full cartridge
Ready to load position - note position of new staple
cartridge.
Booklet Tray Stapler
1. Rotate the handle (Area 2) to the up position.
2. Access the Booklet Stapler by pulling out the Booklet
folding drawer (Area 4) in the MFF.
3. In the lower right area of the drawer, swing out the
mechanism by grasping the green handle. You should
now see the twin stapler heads.
4. Grasp one of the staple head assemblies, and with a
slight pinching action, pull out the empty staple
cartridge.
5. Replace with a new cartridge.
this consumable part.
NOTE: Before inserting new cartridge, remove
the small orange clip. It is there to ensure the
staples remain in the housing during shipment/
handling.
6. Repeat #4 and 5 for the second stapler cartridge.
7. Close the Booklet folding drawer (Area 4) in the MFF.
8. Rotate the handle (Area 2) to the down position.
Contact Xerox
to order
228 of 256
Advertisement
