Advertisement
Replacing the Dry Ink Container
file:///C|/Documents%20and%20Settings/Miz%20B/My%...UGTA/Nuvera%209.0%20UGTA_FINAL/English/cru_25.htm (2 of 2)8/13/2008 2:12:58 PM
1. Open the front access covers and identify the correct
container.
2. Move the Dry Ink Container latch to the left.
3. Remove the used container by pulling the container
outward. Keep the output hole of the old container
pointing up to avoid spilling any residual dry ink.
4. Prepare the new container for installation. Before
removing the orange seal, shake the container end to
end five times. This mixes up any dry ink that may have
settled.
5. Remove the orange seal.
6. Insert the new container. Make sure:
the intake core punctures the container's inner
seal
the container is completely seated
the arrow on the container lines up with the
arrow on the printer housing
7. Package the used container for return. Use the box and
prepaid return label to return the old unit to Xerox.
224 of 256
Advertisement
