Advertisement
|
Home
file:///C|/Documents%20and%20Settings/Miz%20B/My%2...TA/Nuvera%209.0%20UGTA_FINAL/English/hdi_p_000.htm (1 of 2)8/13/2008 2:17:06 PM
|
Resources
|
System Tour
Printing your Document
You can print with the Xerox Nuvera in several ways:
If you have a network you can submit a job to the Xerox Nuvera printer directly from your desktop through your Internet browser.
You can download drivers and print directly from your desktop applications.
You can also print from a data CD using the media drive on the Xerox Nuvera.
Depending on your system configuration, the Xerox Nuvera can offer many powerful features for reproducing documents:
Make booklets
Insert pages
Collate, stack, and staple document sets using the BFM
Collate, stack, and staple document sets using the MFF
Collate, stack, and bind document sets using 3rd Party Finishers
Adjust image quality
for various original types (photos, halftones, text)
Build
and
store jobs
online for printing on demand
Print bleeds
(printing "beyond the edge of the page")
Your Xerox Nuvera functions as a
Supported File Types
The following file types can be submitted to the printer
PDF
TIFF
ASCII
PostScript
PCL
Related Hints and Tips
Subtopic
Job fault after
If a job faults after moving it from one queue to another, and the fault indicates something to the effect that queue
switching queuest
attributes are corrupted, and that a restart is required, yet a restart does not solve the problem, the cause is likely
that the job's paper size is in conflict with the programming attributes of the queue. For example, the job may
contain paper sizes that are not supported by the output destination programmed in the queue.
PCL driver and
FreeFlow Print Server will display the "queue default paper size" for the paper size of jobs sent from the PCL
paper size
driver. The same will happen for PS jobs sent using a custom paper size. The job will print on the correct size
paper in both cases. This is just a display issue.
Percent complete
For very long jobs, the percent complete indicator may not be correct. Use the Pages Printed indicator to monitor
indicator
job progress against the known size of the job.
Print to File with
If you want to Print To File a PS or PDF job with DocuTech Emulation enabled, select a save type of PDF. You will
DocuTech emulation
then be able to reprint the job with DocuTech Emulation enabled and the job will print as expected.
Staple print with
If you want to staple print a job that requires two sizes of SEF stocks, and one of them is also loaded LEF,
two stock sizes
program both the stocks that you want to use with the same custom Type. When sending the job, select the
custom Type and the job will use the correct paper and staple. If you do not do this, the job will fault because it will
attempt to use LEF paper and won't be able to staple.
Tab job –
When submitting a landscape job that contains tabs running across the top, enable the 180 rotate option to get the
landscape with tabs
proper orientation of the image on the tabs.
at top
|
Search
|
Problem Solving
network workgroup printer
and, depending on the system you have, a
from your PC
or
Hint/Tip Description
70 of 256
|
Index
|
Maintenance
workgroup
printed from the media
drive:
About this Site
scanner.
Advertisement
